There’s something enchanting about classic hardwood flooring. The wooden panels feel like home but, at the same time, reflect luxury and elegance. That is only if you take good care of them, maintaining and polishing the hardwood every now and then. However, over time, the flooring panels can start to bulge, seep in dark spots, and develop mold. The only thing to do then is to replace the floor entirely. This may be the best way to prevent the rest of your house from getting affected by the same problem.
But how long does it take to replace the flooring exactly? Do you have to sacrifice weeks off your daily schedule, or is it just a few days? Technically, it only takes around 2 to 3 days to install the new flooring, although the total time can vary depending on the process and multiple different factors. To find out more about the procedure, make sure to read this article until the end.
How Long Does it Take to Replace Flooring?
Every floor is different, and the time it takes to lay out a brand-new base layer varies according to the type. While it typically takes contractors about two to three days to set the floor in place, it can take longer if the size of the floor is big. Moreover, there’s usually a team of contractors that work together to get the job done. The bigger the team, the faster the results.
Additionally, hardwood floors take longer to install than marble tiles, as the setting and adjusting time is separate for both. There are also numerous other steps and factors that affect the overall outcome when dealing with flooring replacement in Cypress, TX.
A Simple Guide to How Hardwood Floors Are Replaced
It is essential to know what happens during a flooring replacement project in order to find out the timeline. Here is a brief breakdown of some of the most crucial steps:
Step One: Removing The Old Floor
The very first thing that needs to be done is removing the old floorboards. This allows the contractors to work with a clean slate, ensuring the rest of the process goes smoothly.
Step Two: Acclimation
One of the most important steps of a flooring replacement is acclimation. It’s when the hardwood flooring panels are left open in the air, giving them time to blend in with their environment. While this step might seem useless, it is of great importance as it lets the wooden panels breathe and acclimate, which further allows them to settle in place.
Step Three: Laying The Subfloor
If you’re getting your entire floor redone, it’s probably because of significant damage. However, replacing a floor doesn’t just focus on the top layer but rather the underlay as well. Contractors take the time to inspect the entire length of the subfloor, fixing any issues that there may be while simultaneously putting down a new subfloor.
Step Four: Installing The Hardwood Flooring Panels
Once the foundation is solid and in good shape, the final step will be to fit the flooring panels according to the desired shape and size. Since this phase is the last, it only takes a few days for the contractors to wrap everything up, leaving your house with a glistening new floor.
The total time it takes to replace a floor varies on the square feet of the floor and the type of flooring material you’re going for. On average, hardwood floors can take around 5 to 7 days to be replaced. For more queries and tips regarding interior designing, feel free to contact AMS Designer Floors & Interiors at (281) 780-9990.